12 Search Results for "washing machine"

This can be caused by excessive use of detergents, always using low temperature wash cycles & leaving door closed between uses.

Run a number of wash cycles at 90°C without any laundry in the machine, add a cup of sodium carbonate to reduce mould build up on door seal.

Please check transit bolts have been removed from appliance, check appliance is level & feet locked into position.

Refer to instruction book for further information.

Please check water supply is fully turned on.

• Please make sure door is properly closed & locked.
• Please check inlet hose is not twisted or kinked behind appliance.
• Please check drain hose is not too low & syphoning water out.

Refer to instruction book for further information as error code varies between models.

Please check drain hose is not twisted or kinked behind appliance.

• Please check drain hose connection to plumbing, ensure blanking plug has been removed so water drains into waste.
• Please check drain hose or filter are not blocked.
• Please check drain hose is not too low & syphoning back.

Refer to instruction book for further information as error code varies between models.

Please check load as maybe uneven & unbalanced causing appliance not to spin, change load & try again (spin only).

If UNb displayed then load was unbalanced, change load.

Refer to instruction book for further information as error code varies between models.